Wiper-Dust Seals -Fitco Orings

 Wiper Dust Seals -Fitco Orings 

Fitco Orings manufacturers largest range of Seals

Fitco wiper seals are used to protect seals preventing from dust, mud, water particles etc. They are made of nitrile rubber generally 90 shore a, for press in fitting in open housing

Wiper Dust Seals are installed in the sealing configurations of hydraulic cylinders to prevent contaminants such as dirt, dust and moisture from entering the cylinder as they retract back into the system.

Wiper seals - also known as dust seals, scraper seals and excluders - are common across many hydraulic and pneumatic cylinder systems, and are also used in telescopic suspension forks for motorcycles.

Contamination can cause significant damage to the rod, cylinder wall, seals, and other components, and is one of the primary causes of premature seal and component failure in a fluid power system.

The wiper seal is the most undervalued seal type in the hydraulic cylinder in relation to its important function. Particular attention should be drawn to its selection, the surrounding environment and service conditions must also be taken into special consideration.

Material : NITRILE(NBR) , VITON(FKM).

For Further Detail Contact us on :

Email :Fitco@fitcorings.com

https://www.fitcorings.com/wiper_dust_seals.html